Crank Case Vent Oil Separator D9FZ-6A785-A

[Desert Patina]

I recently came upon some pictures of the crank case vent oil separator I've been looking for, right out of the box...

1638

And out of the box...

1639

It is up for sale currently, I took it from their sales page.

I'm seriously thinking, however, of tapping the hole and adapting a water separator used for irrigation for the purpose.

In the rat tradition, I was thinking a beer can and steel wool would be more appropriate for my particular steed... but it wouldn't work for me, I'm a teetotaler.

[MikeFleming]

That may not fit the later EFI manifolds. See this thread for what I'm talking about:

http://www.svocop.com/forum/showthread.php?1016-vacuum-or-cooling&highlight=crankcase


The EFI type points at a 90 degree angle out of the can so it can exit straight forwards. The can pictured above points upwards ~30 degrees from vertical - looks like it will foul the bottom of the intake casting as soon as you get a hose on it.

[Desert Patina]

Thanks for catching that, you are absolutely right. Feel free to delete this thread (or please do :) )

[8T6 SVO]

Delete it - nothing going!

This is a perfect example of how people learn the differences in specific parts. To see something like this before they purchase a part they don't need or can't use is eye opening.

8T6