My old setup

[AKA BB]

FEW OF MY DYNO CHARTS....

A237 Cam and Honestly the best looking Dyno i have ever seen from my setup.

http://i93.photobucket.com/albums/l51/justa4banger/DYNOS/Dyno5run.jpg
7623

Here is a comparison of my home ported head VS Bo's ported head with a Stg1.9 cam from Bo for both dyno's.
Keep in mind my turbo was maxxed out at 400+whp, thats why peak numbers aren't much higher...

http://i93.photobucket.com/albums/l51/justa4banger/DYNOS/BoportbaselineSTG1.jpg
7624

Last but not least, low Boost (22psi or so) Ranger ORller vs a Stg 3 Boport.. Bigg difference in power.

http://i93.photobucket.com/albums/l51/justa4banger/DYNOS/Dyno.jpg
7625

[MikeFleming]

Is that with a stock EEC?

[Chalky]

What are the specs on the rest of the set-up????

[Raven855]

His specs are over on TF if you are interested.

[AKA BB]

Sorry guys this took so long to update, just been busy...

Lets see

Boport head Stg3
1.9 cam, but i ran MANY other ones...
gutted knife edged intake
60mm TB
Custom FMIC
SC50 trim turbo
MotionD Header (no longer available)
3" DP and elbow
28psi
28*total timing
105 octane
PE comp with MAF conversion,
65lbs injectors
45psi base FP

I'm sure there's more.... i just can't remember...
Short block was a bone stock unit with ARP rod bolts....well TRW forged pistons

[Rlessary]

Nice

[gt anny]

Impressive:)

[MikeFleming]

FYI: I have d/loaded and posted in-line the dynp charts into the first post. Don't know how long this Photo Bucket account will be around and didn't want to lose the data.

Reference this thread:
http://www.svocop.com/forum/showthread.php?2430-Sad-News-Kevin-Hill

[Sick Puppy]

Thanks Mike. I saved some pics of his SVO myself.
RIP Kev...