PDA

View Full Version : my progect svo in 1986-1993



v8eater
10-15-2012, 06:27 PM
Here is what I did with the custom thermostat restrictor

v8eater
10-15-2012, 06:44 PM
1757

3A
100 CFM
1/4" Bolt
3"
NA
Flange Mount Blower
12V
1.4 lbs.



This is the one I used to suck air from under the stock location intercooler.This idea was from a car magazine,Im not sure which one anyway they had a 1983 turbo gt they put a svo intercooloer under the hood then hooked a bilge fan to it.I took it off I felt at speeds above 50 the air flow needed to be more.

v8eater
10-15-2012, 07:51 PM
here's the valve I used for boost controll found it at lumber city1758

Patrick
10-16-2012, 02:10 PM
here's the valve I used for boost controll found it at lumber city1758

Ice cube tray valve for the fridge! I recognize that.

v8eater
10-17-2012, 02:46 PM
around 1987 one night the rear axle started making noise,I drove home jacked the car up took off the diff cover found three of the teeth were missing out of the ring gear,so I went to get a ring and pinion set for a 8.8 rear only to find they had a problem getting gears for 8.8,so some how I checked the diff gasket pattern found out the axle was a 7.5,so I asked for a 7.5 gear set 3.73, they had plenty ,I only changed the ring gear I kept all the shims the way they were,It worked fine,I made plans to get a 8.8 with 410 gears installed.

v8eater
10-18-2012, 06:28 PM
1763
1987 LACR lancacter raceway,I mite have put to much white tape on the tail light, I had duel monza exhaust tips,also had the wheels polished,that day I ran 15.4 15.2 14.6,mods were exhaust and hollow cat

v8eater
10-18-2012, 06:54 PM
1764
I don't miss the white windshield wipers
also reminds me how many times I had to put glue around the head light to get them that clear,not foggy

v8eater
10-18-2012, 07:02 PM
1766
another picture

v8eater
10-18-2012, 07:09 PM
1768

Not sure if you can see the .05 wheel weights to off set the locking lug nuts,oh Mine did come with the koni adjusting knob

v8eater
10-18-2012, 07:23 PM
1769
I had a problem with my stock steering wheel horn,it seems on hot days is would stretch or move enough to turn on the horn until the battery was dead,I had a cheep air horn on it I was at work when someone said "your car alarm is going off" I said "I don't have an alarm" so I un hooked the stock horn pad I came up with the idea to put two small buttons on the back side of the steering wheel,It came in handy later when used for nitrous

MikeFleming
10-18-2012, 08:38 PM
FYI: You can add up to ten pics per post.