Console switch panel install

[k98dave]

When I got my car the console was in the back seat missing the switch panel.
I have a whole switch panel assy & harness The switches and clock are installed but not sure how the one metal bracket that has the relays attached to it mounts. I'm getting ready to install new carpet so before I re install the console I would appreciate any diagrams or photos of how this mounts up if anyone has something.

Thanks

[MikeFleming]

Some pics.
2016
2017
2018
2019
2020

[TheSVOTrust]

Mike
Doesn't the metal trim on the front GLUE to the housing around the switches?
Mark
P.S. Asked at the other sites too

[MikeFleming]

Yes, the front [visible] trim plate is glued (and partially retained by the switch bezels). It's critical for it to be perfectly flat for most glues to hold it.

[k98dave]

Thanks Mike,

With the pictures I figured out my problem, the plastic standoff that the plate screws into was broken (the one in lower left of first image) I epoxied it back in place. Mounts up fine now.

[MikeFleming]

Glue is a wonderful thing!