List of 'vendors' who support the site?

[ChrisCurtin]

Hi,

Is there a list of the supporting vendors on the site? I occasionally see a pink 'vendor' label under someone Avatar but no information about who they work for. Some are obvious :) but I figure if I'm going to buy something I want to go to someone who supported our hobby.

Thanks,

Chris

[Meotchh]

Chris,

There is not such a list just yet. We are working on Vendor details & look for them to come soon in 2013.

In the mean time, here is a short list of my personal favorites:
Bo-Port (http://www.bo-port.com/) <Click on link
Killian's Porting (http://killiansportingservice.com/) <click on link(Warner Robbins, GA & his work is on par with Bo's work if you don't want to ship to CA)
The Fox Shoppe (Found on Face Book)
Fox Mustang Restoration (http://www.foxresto.com/) <Click on link
Frank's Head & Engine Service (Griffin, GA) {It's one of the most complete automotive Machine Shops in your area (770) 229-1888, ask for Frank or Mark}
Maximum Motorsports (http://www.maximummotorsports.com/store/) <Click on link

[ChrisCurtin]

Thanks.

Bo-Port head is on order (should ship any day!) but thanks for the Killian's pointer.
Found out about Frank's after I had a local shop do the machine work (Goza Performance in Acworth).

If I'm ever crazy enough to do this again I'll keep them in mind.

Thanks,

Chris

[Raven855]

Mitch listed his favorites and to that list and at the top would be Bob Tweedy(firsthero) for leather. He supplies steering wheels, shift knobs and e brake handles. You will not find better work and service! I have also gotten some of Pats 3G conversion wiring which was good. I have been satisfied with the stuff I have gotten from Stinger ie injectors and exhaust stuff, good service too. I also got a t56 adapter and the TC mileage module from Caroth. The timing pointer from FEP is a nice piece. I like the book from David Larocque and Mikes book is a great reference too(although I can never seem to get it back when I lend it out. Its been gone now for 6 months)I would buy product from any of these folks without hesitation!

[Meotchh]

Thanks.

Found out about Frank's after I had a local shop do the machine work (Goza Performance in Acworth).

If I'm ever crazy enough to do this again I'll keep them in mind.

Thanks,

Chris

Just a little disclaimer... I am a little impartial to Frank's since its my dad's shop. But you are dealing with over 40 years of proven engine building experience in drag racing, circle track racing, truck pulling, & your every day street machine. Mark has built many 2.3/2.5 roundy round motors that kick ass.