turbo to intercooler tubing, couplers and cheap BPV

[in2fords]

Looking for a cheap bypass valve, couplers sizes 3" straight and 2.5-2" 45degree, 7 inch tube 2.5" with connection for bypass valve. Thanks, Jeremy

[SVO4PWR2]

I might have what you need and at the right price . . .i owe ya :)

Let me check tonight.
-RICH-

[in2fords]

Sounds good Rich, this time it will be Postal MO :)

[in2fords]

OK, got the silicone parts and valve, all I need now is a straight 3" connector in aluminum or stainless, a 45 degree 2.5 to 2" about 5
inches long reducer in stainless or aluminum and 2x 2.5" clamps, 2x 3" clamps
and 2x2" clamps.
Thanks, Jeremy

[Meotchh]

Jeremy,

Did you check with Columbia River Mandrel Bending? They carry every thing you're looking for. http://www.mandrel-bends.com/catalog/

[in2fords]

Good knowledge, Thanks Mitch :)

[MikeFleming]

all I need now is a straight 3" connector in aluminum or stainless, a 45 degree 2.5 to 2" about 5
inches long reducer in stainless or aluminum How long a piece of 3" alum tube you need? I've got some scraps available. Pay for shipping.

[in2fords]

Awesome, Just long enough to join to pieces of silicone, 3"long would be perfect. Let need know best payment method
Thanks a lot, Jeremy

[MikeFleming]

Just to be clear: 3" diameter (OD) by 3" long? or 2.5" diameter by 3" long?

PM me a shipping addy.

[in2fords]

3x3
Pm on its way

[MikeFleming]

I'll dig through what I have tonight.

[in2fords]

Sweet, Thanks :)

[GLASSMAN]

I have a bosch bpv

[GLASSMAN]

I also have a inner cooler ,,, and custom tubes.... Give me a call ,,, or come up on sunday

[in2fords]

I got a bpv but not sure on its condition yet.
Maybe we can work out a trade, maybe get that new atc 70 frame powder coated hot pink for the girls in your life?

[MikeFleming]

... powder coated hot pink for the girls Or to match his eyes??

[in2fords]

I can't make too much fun of him, the pink PC is left over from doing my fiancée motor but now that the stang is down guess who is driving it:(

[in2fords]

ALLRIGHT :)thanks to the members here I have all the parts to get my car running :) I don't think I need anything else. Im running it without a intercooler for now just to get it running, in the meantime I will modify the FMIC I got from Glassman, clean and powder coat the parts and get it ready to install. Thanks guys :)

[MikeFleming]

^
More pink?

[in2fords]

^
More pink?

Im trying to keep all the pink on her explorer and away from my capri and stang :) Im doing all the mocking up today, tomorrow I fab and weld up the wastegate actuator mount for the t4 housing and hopefully get to start it, finger crossed :) Now onto my next project, Im getting the intercooler mocked up. Then the next project is I will be ordering a wastegate housing with a 2.5" v flange and try to build a 3" down pipe from that.

[in2fords]

BIG PROPS TO MIKE FLEMING AND GLASSMAN :) Fleming sent me a piece of tubing that I needed and charged me less then shipping cost him. I was expecting some ugly stained up thing with jagged edges I would have to clean up and that would have still been more then awesome. Instead I received a perfectly nice high quality tube that he not only cut but actually deburded and sanded it down and made it very presentable. Glassman handed me a intercooler setup no questions asked, real nice setup and that's ontop of all the knowledge he has shared with me:like3: Thanks to both Mike's, if you ever need something let me know, I don't have much but your welcome to it :)

[MikeFleming]

You already know what's expected of you:

Get 'Er Done!

And then post pics!