View Full Version : Ground Strap
stockman1
06-09-2013, 08:09 AM
Upon removal of the intercooler, I found a ground strap attached to the passenger side firewall near the #4 spark plug. The non firewall end was dangling, where does it attach? :runningdog:
MikeFleming
06-09-2013, 09:56 AM
On non-comp-prep models, it attaches to the upper, right (passenger side for USDM) bell housing bolt. On comp prep models that Patrick and I have inspected, it attaches to the upper left bell housing bolt.
stockman1
06-09-2013, 10:41 AM
On non-comp-prep models, it attaches to the upper, right (passenger side for USDM) bell housing bolt. On comp prep models that Patrick and I have inspected, it attaches to the upper left bell housing bolt.Thanks!!
stockman1
06-13-2013, 02:33 PM
I am missing the upper right bell housing bolt does anyone know the correct size and type? is there another ground spot for that strap until I am able to get the bolt? thanks
in2fords
06-13-2013, 04:03 PM
Id assume that the upper left would would work just as well on your non-comp-prep .
stockman1
06-13-2013, 04:28 PM
Id assume that the upper left would would work just as well on your non-comp-prep .it doesn't look like it will reach. How about the intercooler mount bolt?
MikeFleming
06-14-2013, 11:44 AM
The thread size is a 10x1.5. and the bolt is maybe 40-45mm long (don't have one handy). The stock ones use a washered 13mm hex head while all hardware store bolts in that thread size will probably come with a 17mm hex head. Take one of the other five bolts out and take it with your to the hdwr store. Iirc all six are same.
Someday when I have some free time I will look up the exact bolt spec and Ford service part number in the catalog. But that's not gonna happen today.
stockman1
06-28-2013, 04:30 PM
The thread size is a 10x1.5. and the bolt is maybe 40-45mm long (don't have one handy). The stock ones use a washered 13mm hex head while all hardware store bolts in that thread size will probably come with a 17mm hex head. Take one of the other five bolts out and take it with your to the hdwr store. Iirc all six are same.
Someday when I have some free time I will look up the exact bolt spec and Ford service part number in the catalog. But that's not gonna happen today.45mm worked perfect
MikeFleming
06-28-2013, 06:49 PM
So you're saying I was right?
Somene make a note of this.
Patrick
06-29-2013, 01:00 PM
The above post will be deleted in 5....., 4...., 3..., 2..,
stockman1
06-29-2013, 04:34 PM
So you're saying I was right?
Somene make a note of this.i was going to take one out and measure but I was near a Home Depot and said aw hell Mike knows his sh/t so I bought a 40 and 45 mm. Cheapest Home Depot bill ever $2.45. Thanks again, SHAFT
stockman1
07-20-2013, 10:57 AM
BTW The ground strap when attached to the bell housing cured many electrical issues including the intermittent radio.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.