Knock sensor to ECU

[notacarlo]

Can anyone tell/show me what wire in the connector at the ECU is the knock sensor signal?

I am installing a Caspers knock gauge and in previous installations one would tap to the signal wire at the harness/ ECU. I don't really see an issue with taping the signal wire at the sensor pigtail, other than possibly causing interference before it gets to the ECU.

Thanks,


Dan

[MikeFleming]

Main page of www.svocop.com, upper right, Useful Links, "SVO EEC Pinouts (http://rothfam.com/svo/reference/PEtoLA.pdf) (thanks to Chris Roth!)" link.

Note the KS signal is a VERY low level signal. Be careful to not load that line, reducing hte signal, into the EEC.

[notacarlo]

copy that. Just a test. If it works, great. If not....need another gauge to fill my pod.

[MikeFleming]

A clock is always a good fallback.

[SVO4PWR2]

A clock is always a good fallback.

"Time is Speed Speed is Time"

-RICH-