Log in

View Full Version : E Brake cables



Ford Builder
07-28-2013, 08:08 PM
I need help with a picture of proper rooting of the cables to the E brake handle, Thanks

MikeFleming
07-28-2013, 09:05 PM
I can post them tomorrow. Will need to find the pics first.

Ford Builder
07-28-2013, 09:15 PM
That would be great , I would like rap the brake system rebuild .

MikeFleming
07-29-2013, 06:10 PM
In no particular order - some with old cables, some with new ones.

4971
4984
4983
4982
4981
4980

4979
4978
4977
4976
4975
4974
4973
4972
4985

Ford Builder
07-29-2013, 07:55 PM
I want to thank you very much , now I can finish the job.

MikeFleming
07-29-2013, 08:15 PM
Glad to help!

And now you're banned (until your next post).

ChrisCurtin
07-30-2013, 04:06 AM
Unless your car is really clean, take this time to clean out the 'boxes' that the cables go into (dead center in picture #2). They tend to collect water and dirt and cause the cables to bind (or freeze in my case!).

84svounoh
11-20-2013, 05:54 AM
I purchased the main cable that goes from the lever back but I need the rear two where can I find those?

MikeFleming
11-20-2013, 09:16 AM
The SVO uses a rod between the handle thingie and the balance lever underneath - that attaches to the two cables. I used a Raybestos parts (cables) on my 84. Thought I posted the number already, but didn't find it on a quick search.

Will look up and post later.

MikeFleming
11-20-2013, 03:01 PM
Rear Parking brake cables for SVO: Raybestos BC93273.

RAYBESTOS Part # BC93273 Professional Grade; 69 1/2" Overall Length
Rear; SVO Model
Currently $30.79/each at rockauto.

5741

84svounoh
11-24-2013, 08:03 AM
that cable there connects the two rear wheels to the other cable?

MikeFleming
11-24-2013, 09:24 AM
There is no "other cable".

There is a center balance bar that the forward ends connect to (see Post #4 above, pics 3 & 4). The center of the balance bar has a threaded rod in the center that is connected to the parking brake pull handle. The length is adjustable from inside near the base of the parking brake handle (Post #4, pics 5 & 6)..

84svounoh
11-24-2013, 09:06 PM
I must have the wrong cable. And I need the forward ends and that balance bar