Log in

View Full Version : Wiggle test


brsvo
08-04-2013, 05:34 AM
How does the EEC 4 wiggle test for broken wires get done?
MikeFleming
08-04-2013, 09:00 AM
It looks for any rapid, short-duration change in signal (voltage) during the test and sets a flag (a code) if any are detected. On the technical side the Pre-87 4-cylinder models are running a CPU at 7.5Mhz and have one 10-bit A/D converter that time-shares between the assorted analog inputs.

So the "change" would probably need to me more than 5ms long to be detected - but that testing data has not been published, afaik.
brsvo
08-04-2013, 09:18 AM
I am aware what it does just not how to run it. My 86 SVO with LA3 by the way.
brsvo
08-04-2013, 09:24 AM
I want to run the test while my Pimp is in the shop.
MikeFleming
08-04-2013, 10:10 AM
Quick - search the Interwebs (AKA "Quick, To the Bat Cave!"):

http://www.cb4x4.com/PDFs/Engine%20-%20EFI%20-%205.0l%20eec%20iv%20testing.pdf

Has a detailed step-by-step.