View Full Version : Speedo Cable Question
JTurbo
09-17-2013, 05:53 PM
Looking for a speedo cable for my 9L project. Napa lists a 72" and a 76" long cable. Anyone know what the proper length is for an 86 SVO?
Thanks - JT
MikeFleming
09-17-2013, 06:36 PM
I have a NOS one in the shop somewhere. I will measure it sometime this week & post, if I remember.
JTurbo
03-30-2014, 11:16 AM
I finally jacked up my SVO and measured. I came up with ~68 inches (ball-park since I didn't remove the cable where it goes through the firewall into the back of the speedo). So it looks like a 72" cable is the correct one.....
svobrad
03-30-2014, 12:16 PM
I measured two speedo cables from the shop and they seem to be about 71.5 ". Tricky little thing to measure. The cable itself protruded out maybe 1/4" on the gear end.
Summit says 72. One day from NAPA, BTW, looks like they have stock in the CT DC, and Enfield has 2 (!) in stock.
http://www.summitracing.com/parts/atp-y805/applications/model/mustang/submodel/svo
JTurbo
03-30-2014, 01:34 PM
Thanks guys - ordered one via eBay earlier today. Should be all set for the 9L project.
JT
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.