Desert Patina
11-22-2013, 06:44 AM
Hello everyone,
If anyone is in the Phoenix area and willing to help, I'm at that stage where the last 10% is taking 90% of the time. Its that stage where I've already done quite a bit, and it isn't going back together very easily.
I've rebuilt an 89 2.3 engine harness to work in the SVO ... I've checked (and sometimes modified) the main harness to go with it. Those are back in and secured. The dash is balking on the last inch it takes to fit in, there is just a few wiring odds and ends to go in (fan wiring and a few grounds that were severed that need to be repaired).
All the while there is that nagging sinking feeling that I'm putting it back together to see it all not start and have to undo it all again.
Anyone willing to stop by and help out, please let me know. Its light work from here to starting, but the help would be helpful :)
The raceday is a week from Saturday, so any time after 7, or tomorrow (sat) or the Friday after Thanksgiving.
If anyone is in the Phoenix area and willing to help, I'm at that stage where the last 10% is taking 90% of the time. Its that stage where I've already done quite a bit, and it isn't going back together very easily.
I've rebuilt an 89 2.3 engine harness to work in the SVO ... I've checked (and sometimes modified) the main harness to go with it. Those are back in and secured. The dash is balking on the last inch it takes to fit in, there is just a few wiring odds and ends to go in (fan wiring and a few grounds that were severed that need to be repaired).
All the while there is that nagging sinking feeling that I'm putting it back together to see it all not start and have to undo it all again.
Anyone willing to stop by and help out, please let me know. Its light work from here to starting, but the help would be helpful :)
The raceday is a week from Saturday, so any time after 7, or tomorrow (sat) or the Friday after Thanksgiving.