Intercooler Hoses

[94VERTiGO]

Looking for new intercooler hoses that are the same as those once offered by Forced4Motorsports. They are strong enough to support the intercooler without the brackets. I have had a set for about 7 years, but they are getting weak now from the oil that creeps into the intake.

Thanks,
Pat

[Chalky]

you should be able to locate that style hose at your local NAPA.

[NY eric]

Looking for new intercooler hoses that are the same as those once offered by Forced4Motorsports. They are strong enough to support the intercooler without the brackets. I have had a set for about 7 years, but they are getting weak now from the oil that creeps into the intake.

Thanks,
Pat
Yes napa. I use to ge the Gates green stripe and then I went to the Gold stripe. it is truck Radiator hose. it is sold by the inch. I cant remeber the Ids at the momnet but if you take the old ones they can match them up.

[MikeFleming]

IC inlet is 2.0" diameter, outlet is 2.5". About 3" is needed for each (then trim to fit).

Some of the straight radiator hoses have reinforcing (steel) wires inside the rubber so a hacksaw or wire cutters may be needed.

[baltimucho]

http://www.stinger-performance.com/universalparts.html

Scroll down to "Silicone Stock Intercooler Couplers & T-Bolt Clamp Kits This kit includes a straight 2.38" coupler for the throttle body attachment and a straight 2.0" coupler for the turbo outlet. The 4 included T-Bolt clamps ensure the couplers don't blow off under boost. Our silicone couplers are constructed of 4 ply material, temperature rated to 392 degrees F, and pressure-rated to 43.5 psi at that 392-degree temperature.
Price: $ 30.00 Shipped"

::m::

[NY eric]

Yes napa. I use to ge the Gates green stripe and then I went to the Gold stripe. it is truck Radiator hose. it is sold by the inch. I cant remeber the Ids at the momnet but if you take the old ones they can match them up.

The post above reminded me I switched to a 4 ply sillicon hose twards the end as well. It will absolutly hold up better than the Gates green stripe or Dayco Gold stripe I used when we first started selling them.

[94VERTiGO]

Thanks everyone. I will pick some up today.

[Under Pressure]

I ordered a hose for the intercooler to throttle body 2 3/8 to 2 1/2 HPS HTSR-238-250-BLK

[Under Pressure]

Intercooler to throttle body clamps from Summit racing :Vibrant Performance #2791 and #2793