Log in

View Full Version : Trans Preventitive Maintenance



84svounoh
03-17-2014, 06:38 PM
So I just bought a Spec Stage Two clutch and I would like to go ahead and swap out the throw out bearing. None of you guys would happen to have a part number for one would you? Also is there anything else I should give attention while I have the tranny out?

84svounoh
03-19-2014, 12:49 PM
I found a pilot bearing and clutch release bearing on rock auto i would prefer the timken bearings do you know if these are accurate because i have found alot of the parts stores say fit our cars do not lol.

84svounoh
03-19-2014, 12:51 PM
http://www.rockauto.com/catalog/moreinfo.php?pk=1118182&cc=1133660 Here is the release bearing.

http://www.rockauto.com/catalog/moreinfo.php?pk=2472582&cc=1133660 Here is the pilot.

Mike S
03-19-2014, 04:22 PM
Its been my experience that the Spec clutch comes with a new throw out bearing. It looks the same as you show from rockauto. If i remember correctly, it also came with the pilot bearing, but its been a few beers ago, so I could be wrong.