Need advice on exhaust hangers when going single to dual please??!

[phils85svo]

I am in the process of converting my 85 SVO's pathetic single exhaust to a complete Stinger exhaust setup consisting of full Holset friendly 3" DP, 3" x 6" SS flex pipe, 3" Mid-pipe, 3" to 2 x 2.5" Y-pipe, Flowmaster 2 chamber (2.5" in and out) and 2.5" Stainless Flowmaster tailpipes.

Thanks to living in South Carolina, I am not required to have a catalytic convertor, so that is out of the equation :-).

So far, I have the 3" DP installed, the flex-pipe, and the mid-pipe. Awaiting to still be installed is the Y-pipe, mufflers and tailpipes. If you have read my other posts on going from dual to single fuel pumps, you know I have finished up my elimination of the chassis mount pump and everything is ready for the dual exhaust. I lack one thing, the proper hangers and support for the rest of the exhaust.

Does anyone have a line on a hanger kit of some sort or have pieced together their own kit? I am open to suggestions as I really need to get it wrapped up now that I have finished the fuel system (at least up to the engine).

Here is a pic of where mine currently ends, right in the middle, nothing but wide opened spaces after that! :-) Help!

6786

[Meotchh]

Any respectable exhaust shop will have every variation of hanger you can think of. With that being said, Midas or other chains are not considered respectable.

You can also hit up Matt at FMR to see if he has something.