soldthedart
10-18-2014, 10:45 AM
I was having an issue with my cooling fan not working at all unless I used a jumper, so I did a quick search and came across a lot of really good info.
After testing continuity to ground it turned out to be the wire that went on the sender under the lower intake.
The wire was broken right at the insulated push on end and you couldn't tell by looking at it.
A quick solder job and she works great!
After testing continuity to ground it turned out to be the wire that went on the sender under the lower intake.
The wire was broken right at the insulated push on end and you couldn't tell by looking at it.
A quick solder job and she works great!