PDA

View Full Version : Pictures of driver's side hoses, swaybar, wiring etc



ChrisCurtin
05-16-2015, 12:27 PM
Hi,

I went to install the swaybar today. The PS hoses were already installed and as I tried to install the driver's side sway bar I don't see how it can go it with the hoses the way they are. I did some searching for a few minutes and can't find a good picture of that area of the car, lots of the swaybar bracket or the area under the battery, but nothing farther back to see how everything is routed.

So, any pictures of that area? In particular how do the PS hoses route around the swaybar and how are the PS hoses attached to the frame rail.

Thanks

Chris

MikeFleming
05-16-2015, 01:16 PM
A small smattering assorted collection of pics of that area in assorted stages of assembly from a quick search. Most pics show the FSB unloaded.
8394839583968397839883998400

ChrisCurtin
05-16-2015, 05:11 PM
Thank you Mike.

Never noticed how high the PS hose went along side the battery, that was confusing me. Also surprised to see the return and supply lines 'split' around the sway bar.

Chris

TheSVOTrust
05-18-2015, 01:38 PM
3000 mile car (never apart) show lines NOT SPLIT but the one closest to the frame UP HIGH and pointed up on my 9l CP

Mark

MikeFleming
05-19-2015, 06:27 AM
3000 mile car (never apart) show lines NOT SPLIT but the one closest to the frame UP HIGH and pointed up on my 9l CP
For the record, What year is that car?

bluemax
05-21-2015, 11:10 AM
1986

I would post pics, but I can't get them to upload...

MikeFleming
05-21-2015, 11:15 AM
^
Mitch (meotchh) can assist you.