WTB cylinder head

[green57]

Guys, does any body have a 85 later head that they would sell. I'm in Germany and all my leads have turned up nothing :avataraFu_BangingYo. Please help out a Fellow American who's down on his luck. I need to get this thing back on the road before the cold weather sets in.

Thanks for any help.

G57

[firsthero]

hey. i have several heads. i have never looked to see which is a 85. do you know how? i will look.
where wll the head be sent? also what do you want to pay as i dont sell much of my stash of motor parts.
bob

[green57]

Bob,

Thank you for your kind offer. The '85 and up head will have an extra casting and a bolt hole drilled in it to support the installation of the square lower intake. Looks like thishttp://i1373.photobucket.com/albums/ag362/joepik1/2015-09-09%2003.25.30_zps36jz3zgn.jpg (http://s1373.photobucket.com/user/joepik1/media/2015-09-09%2003.25.30_zps36jz3zgn.jpg.html)

The head will be coming to Germany, But it can be mailed through the U.S. Post office To my APO box number. I will PM you with the details.

A huge "Thank you".:like2:

Regards,

G57

[green57]

Bob, I need to know if you would still like to sell one of your heads. I will buy one, but we need to start on this transaction. I am starting to run out of time to work on this, please let me know. I will start looking for another source if you don't wish to sell, but I need to know what you want me to do. Please contact me.

G57

[firsthero]

.hey. i have gone thru all my heads and i do not have a turbo head left. sorry but it has been a long time since i was there. all mine are round port which is the standard heads. I will tell you that there used to be a company who made and sold adaptors which changed the round head to a turbo head. it was an alum plate. they seemed to work very well.
again i am sorry i didn't help.
bob

[green57]

Bob,

No worries, thank you for trying to help. I'll just have to keep looking.

G57

[k98dave]

Bob,

No worries, thank you for trying to help. I'll just have to keep looking.

G57


I just sold my car and have a spare head, I will get it from storage and see if its the later type your looking for.

[green57]

k98dave, and all,

Have found a crack free head. Its at the machine shop being surfaced as I type this.

Thanks for offering to help.

G57

[green57]

Guys,

Machine shop found a crack in my head so I'm searching once again. Needed (Quite badly) crack free head. PLEASE help! I need to get this thing fixed.

[firsthero]

if you cant find a good head you might want to see of anyone has the adaptor which is converts the round port to a flat port. as i recall it is capable of doing the opposit also.

bob

[firsthero]

i forgot but i believe that the standard head is the same except the flat intake.

bob

[Svofrk]

I may have a head for you. I will have to take a look thru my parts later this week or this weekend.

[green57]

Svofrk,

Thank you very much, I hope you find one. Thank you for taking the time to help out.

[Svofrk]

Looks like I have the correct head head you are looking for. Send me your email and I will send you photos.