Newb questions

[SVO2.3]

Rear control arms
Any one using adjustable lowers.
Are tubulars any good?
Springs?
What fronts are compatable with SVO?
Would like a little drop up front
Panhard link?
Any one using one?
Seems like a nice upgrade.

[Chalky]

Rear control arms
Any one using adjustable lowers.
Yep, Maximum Motorsports (MM) lower and J&M uppers.

Are tubulars any good?

Springs?
H&R Sports, love 'em

What fronts are compatable with SVO?
as Above....

Would like a little drop up front
oh, you'll get one:):)

Panhard link?
Any one using one?
Talk to our friends at MM, it's a niece piece.
Seems like a nice upgrade.

:):):):):)

[Raven855]

On the rear arms, M&Ms are used a lot. Most people simply buy a set of lowering springs and not the adjustables. The H&R sport springs and a nice upgrade and lower the car some. I think Chalky has a pan hard, maybe Doug too.

[SVO2.3]

Well it's on. Got a complete Cobra IRS since my rear end was in need of a total reedo.
I would like to retain the SVO rear brakes since they are shiny new, but everything I read says no way.
So I will have to see for myself as I'm a fabricating fool I may make it work.
So chime in if you have real experience with this swap.

[Meotchh]

Stick with the cobra rear calipers, just upgrade the soft lines.

[SVO2.3]

will I have brake bias issues?

[Meotchh]

The cobra rotors are just over 11". If you're concerned about bias, just add an adjustable valve in place.