View Full Version : SVO Lower Control Arms
Looking for Lower Control Arms. Condition of ball joint not important
Call Ken @ (214) 856 5124
tommyb
11-06-2017, 06:30 PM
I have a set just need to separate shock & rotor in my spare time you can have them for the cost of shipping. Let me know Tom 763-607-2101
Meotchh
11-07-2017, 03:19 PM
Looking for Lower Control Arms. Condition of ball joint not important
Call Ken @ (214) 856 5124
Ken,
The club has a few sets that were donated by a member to raise funds for the club. The only stipulation is the parts must be used on a SVO. Shipping can be a little spendy from WA state though. I could possibly check them in my luggage when I go to DFW in December.
Meotchh,
I don't mind the freight costs.You do not want to go to the airport with that much metal in your luggage. Just tell me how much money you need and where to send it.I live in McKinney just 30 min N of Dallas...If you want to see a stunning gorgeous 1986 all stock with 11,000 miles...just give me a call. The LCA will be used on my SVO.
Ken @ 214-856-5124
tommyb,
Thank you for the response. The club itself has a few sets so I will buy one of those.
Please let me know if I can ever help you find anything
Ken
Meotchh
11-09-2017, 12:52 PM
Meotchh,
I don't mind the freight costs.You do not want to go to the airport with that much metal in your luggage. Just tell me how much money you need and where to send it.I live in McKinney just 30 min N of Dallas...If you want to see a stunning gorgeous 1986 all stock with 11,000 miles...just give me a call. The LCA will be used on my SVO.
Ken @ 214-856-5124
Ken,
I'll send you some pics & allow you to pick the ones you want. I think there might be a set with the ball joints already machined out. I'll get back to you with a price & the shipping cost.
rodster
11-09-2017, 08:23 PM
Is anyone currently machining out the ball joints?
Meotchh,
No need for pics. Just pick out a set with original ball joints still in it. Then tell me how much and where to send the money.
My guy did not want the set with already machined out joints. He wanted to see it in stock form and machine them out himself!!
Thanks,
Ken
Raven855
11-16-2017, 03:17 PM
Be sure and tell him that it is HARDENED! If he is not prepared for that you will ruin an arm or bit.
Meotchh
11-23-2017, 08:51 AM
Meotchh,
No need for pics. Just pick out a set with original ball joints still in it. Then tell me how much and where to send the money.
My guy did not want the set with already machined out joints. He wanted to see it in stock form and machine them out himself!!
Thanks,
Ken
Ken,
I got busy with work chaos before we left for GA. I will have the stock set (with ball joints) boxed up & ready for shipping this weekend. I'll call you with the pricing for everything on Saturday.
Meotech,
Okay..also tell me where to send the money.
Thanks
Ken
Meotchh
11-26-2017, 01:50 PM
Ken,
You've got email. I sent you the shipping pricing & the paypal account info. Call or email if you have any questions.
Thanks,
Mitch
Raven.
Okay, Mitch sent me the Lower Control Arms. Any suggestion on which ball joints and adaptor set to replace the stock sealed ball joints???
Regards,
Ken Mattice
()214) 856 - 5124
Meotchh
11-28-2017, 04:18 PM
Ken,
The control arms are on their way via fedex. You should see tracking updates in your email. ETA is 12/1/17. I'll give you a call when we're in DFW next month. Hopefully I can make some time to meet up & check out your SVO.
Thanks again for supporting the club with your donation!!
The control arms arrived today in good condition..Look forward to meeting you when you are in the Dallas area
Just give me a call at (214) 856 - 5124
Regards,
Ken
Meotchh
12-01-2017, 11:24 PM
Great Ken! Yeah we are planning out some of our trip right now. I'll give you a call after this weekend. We've got a lot going on before we head out to DFW.
The control arms arrived today in good condition..Look forward to meeting you when you are in the Dallas area
Just give me a call at (214) 856 - 5124
Regards,
Ken
Raven855
12-05-2017, 08:15 AM
For the ball joint use the low friction SN95 from Napa 260-1463 (tel:260-1463). The Steeda X2 ball joint will also work. For the adapters use the adapters from Maximum Motorsports MMFCAB-10. They have urethane control arm bushings also 6-208-BL.
I’ve been working on a ball joint that can be used without the adapters.
Robertosvo
12-05-2017, 09:05 PM
I have the ball joint part number that I was using for stock SVO spindles it didnt require the taper adapter.... it was from an 80's tbird iirc....but i could be wrong
Let me find where I wrote it down
Raven855
12-05-2017, 09:17 PM
I had the number for a 68 Chevy balljoint that was supposed to be right
Robertosvo
12-10-2017, 08:47 PM
The balljoint required for the SVO spindle is from a Lincoln Mark VII
the Napa part number I have is 260-1386 or Moog K8471
Raven,
Thank you very much for the part numbers
Regards,
Ken
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.