Steering rack

[Sick Puppy]

I need a new/rebuilt rack for my 2R, it's leaking and has a bad inner tie rod. I was told to stay away from A-1/Cardone rebuilt racks. Are there other sources for reman racks? Are there kits for rebuilding the rack? I have a 'donor' SVO and I'm willing to give a try to rebuild it myself.
TIA, Paul

[Under Pressure]

I got a rebuilt one from Summit Racing, it's been working good with no leaks.

[brsvo]

After reading this I don't know if it will help or not. I know Dave has had rebuilds done and was vary happy with the work.

https://www.svocop.com/forum/showthread.php?1413-Vendor-requirements&highlight=Steering+rack+rebuild (https://www.svocop.com/forum/showthread.php?1413-Vendor-requirements&highlight=Steering+rack+rebuild)

[Art Vandelay]

Beyond general reliability problems, you also have to consider that a rebuilt rack might not have the right valving for a performance application. '03 Cobra is the one most people want, but there are reports of these racks not feeling anything like a real Cobra rack. AGR sells an expensive rack that claims to have Cobra R valving and I think it's worth a look. Flaming River sells a ridiculously expensive rack, and it's interesting because it's the only one out there with a quick 12:1 ratio.

This dilemma is ultimately what led me to go with an electric power steering system.

[brsvo]

That is the advantage to getting your stocker rebuilt, they use the same valving so you get what you had.

[SchoolBoy]

That is the advantage to getting your stocker rebuilt, they use the same valving so you get what you had.

Who's doing the rebuilds?

[brsvo]

http://www.turnone-steering.com/ From Daves thread.

[SchoolBoy]

http://www.turnone-steering.com/ From Daves thread.

Thank you for this link, the 1st one you posted doesn't work for me.