PDA

View Full Version : Sensor plug identification


majestic
10-15-2020, 10:44 AM
Where does this connect? It comes from the same harness where the oil pressure sensor and the sensor under the lower intake are. It is single dark green wire.
9987
MikeFleming
10-16-2020, 08:36 AM
Looks like the oil level sensor in the sump. That's about the only single-wire there besides the 1984/85 coolant temp fan switch, the oil pressure sensor and the coolant temp sensor on the back of the block, intake side..
majestic
10-16-2020, 08:41 AM
Looks like the oil level sensor in the sump. That's about the only single-wire there besides the 1984/85 coolant temp fan switch, the oil pressure sensor and the coolant temp sensor on the back of the block, intake side..


So where would that connect? I don't think we would have disconnected it when replacing the head?
MikeFleming
10-16-2020, 07:16 PM
85.5/86?

Left (drivers) side in the oil pan.
majestic
10-17-2020, 08:16 AM
85.5/86?

Left (drivers) side in the oil pan.


Thanks, Mike!