PDA

View Full Version : Back Home For Good!



Mallethead
10-15-2020, 12:50 PM
Hi Friends,
I returned home to Toney, AL after spending much of the past 10 years overseas working. I have an 85 4e that has been in storage and unfortunately was not given much attention. Now the fun begins! I have begun working on the interior, for some reason my interior panels were not as bad as I orginally thought. I primed them and re-dyed them with SEM pain products and they look really good.

Now I have to put them back in, but have zero (and I mean ZERO) idea which screws to use. When I pulled out the panels several years ago I put the screws in baggies with tags. Thanks to 2 moves now they are nowhere to be found. I have some interior screws in a box that Mike Fleming sent me several years ago. These are leftover from a full set, so I do have a starting point. My question today is, does anyone have a diagram or list of screws, sizes, etc...and where they go as far as the interior is concerned?

I have ordered carpet for the main area and hatch area through LMR, so that is coming shortly and I would like to put everything back together once that comes in. Any advise would be great. More to come for sure as she has sat forever!

MikeFleming
10-16-2020, 08:39 AM
IIRC the two that go under the main arm rest are hex heads, the one on the forward part of the armrest (above the hand grip) is a Phillips. I wonder if LMR has those listed as spares? may have some pics, but it'll take me some time before I have bandwidth to search for them.

MikeFleming
10-16-2020, 08:39 AM
Welcome home, BTW!!

rodster
10-20-2020, 03:59 PM
Welcome home and good luck with the project.

Interior door panels?