-
3 Attachment(s)
My old setup
FEW OF MY DYNO CHARTS....
A237 Cam and Honestly the best looking Dyno i have ever seen from my setup.
http://i93.photobucket.com/albums/l5...S/Dyno5run.jpg
Attachment 7623
Here is a comparison of my home ported head VS Bo's ported head with a Stg1.9 cam from Bo for both dyno's.
Keep in mind my turbo was maxxed out at 400+whp, thats why peak numbers aren't much higher...
http://i93.photobucket.com/albums/l5...selineSTG1.jpg
Attachment 7624
Last but not least, low Boost (22psi or so) Ranger ORller vs a Stg 3 Boport.. Bigg difference in power.
http://i93.photobucket.com/albums/l5...DYNOS/Dyno.jpg
Attachment 7625
-
Is that with a stock EEC?
-
What are the specs on the rest of the set-up????
-
His specs are over on TF if you are interested.
-
Sorry guys this took so long to update, just been busy...
Lets see
Boport head Stg3
1.9 cam, but i ran MANY other ones...
gutted knife edged intake
60mm TB
Custom FMIC
SC50 trim turbo
MotionD Header (no longer available)
3" DP and elbow
28psi
28*total timing
105 octane
PE comp with MAF conversion,
65lbs injectors
45psi base FP
I'm sure there's more.... i just can't remember...
Short block was a bone stock unit with ARP rod bolts....well TRW forged pistons
-
-
-
FYI: I have d/loaded and posted in-line the dynp charts into the first post. Don't know how long this Photo Bucket account will be around and didn't want to lose the data.
Reference this thread:
http://www.svocop.com/forum/showthre...ews-Kevin-Hill
-
Thanks Mike. I saved some pics of his SVO myself.
RIP Kev...