Search:

After installing the 4 gauge wire with the fuse that goes from the alternator and then to the relay ,what do you just cut the black and orange wire before the melted connector and not use it anymore?

Thanks Tom,cars on the road again!

If I can't find a used replacement coil spring does any company make springs for our car ?
Thanks Rob

Looking for used front passenger coil spring. 1986 SVO
Thanks Rob

Then wouldnt these work since they are sn95? http://www.summitracing.com/parts/aje-mu-5001/applications

Head gasket went between 3 and 4 cylinders.

Will do before tearing apart.
Lent guage to friend and never returned just when you need it most.

Ford has oem head gasket 44 $ is felpro better? what felpro part number if better
Thanks

Looks like its a bad head gasket the two center pistons not sure of firing order but when removing plug wires individually those two seem to be giving me the problem. Gasket must of went in between...

Replaced tfi ,plugs, cap ,rotor, wires and removed cat checked fuel for water still no power.
what else bad valve maybe? Timings dead on.

Next on my list picking up in morning not easy to find in many parts store

Was driving home from work in my svo it started
to feel like it was missing. When I came to a light it
started to run really rough and stalled I started it back
up and it felt like I was driving...

Will the stock spindles, brakes and struts work with just changing to the sn-95 lca

What year SN-95 lower control arm works best? I would like to use as much stock svo parts as possible thanks.
Thanks
Rob

What is the correct id size of the silicone vacuum hose from the boost controller to the wastegate?

I currently have a 3" downpipe made of stainless
but it is hanging too low anyone try the new Stinger
model yet? if anyone knows of where to get one that is tucked
up high please tell me where to...

Just finished nos turbo install with the 60 63A/R over the old 60 48.A/R I have to say I like it much better all around!

Can someone direct me on where to purchase a correct oil cooler
gasket.
Thanks

This is very close to stock there still out there I'm running this setup now love it.

MOTORSPORT CLUTCH KIT M-7550-A221 PRESSURE PLATE M-7563-A221 T/O BEARING D9ZZ-7548-A

Mike so your saying just reuse the 0.48 housing? Ive tried to remove an exhaust housing one on a spare turbo and some of the bolts just snap off inside the housing. I have a nos with the 0.63...

I bought this Spoiler Support and installed works great! comes in black and grey cost was $12.99 http://www.gaugepods.com/svo.html
http://www.gaugepods.com/ford.html

Will do Pat! Ill show the report of flow test for
anyone intrested.
Rob

I sent mine out to this place big difference after I reinstalled them they even give a print out of flow test before and after. http://injector-rehab.com/index.htm

I have almost the same exact setup as gyrhead but only thing I have different is
I have a larger throttle body kit I do a mixed highway and stop and go around town
are there any other options to...

I have a nos 60 ar63 Im about to install will i see alot of lag over the stock
ar48.