Search:

With FPR vac line connected it is reading 39 PSIG, when I disconnect it however, it drops to 34 PSIG...is that what you're talking about?

I swapped vams out early on in my attempt to diagnose the issue. Both VAMs are the bigger size as I know my setup requires it but there was no change when I swapped them out. Still getting ECT...

What I meant by running poor was it would not accelerate like it should, just seemed like it wasn't getting enough fuel or there was a vacuum leak. After doing the pressure test/leak test and...

I recently got my 84 SVO running for the first time in over 5 years. The mods I have so far are Brown tops, adjustable FPR, LA3 EEC, Bob log, 3" exhaust, 3G Alt, aluminium radiator, Gillis valve,...

PM sent

I'm looking for a gauge cluster for my 84 with the printed circuit board in decent shape. Anybody have an extra they'd like to sell?

I bypassed the inertia switch for now and checked the wires going to the ignition switch. We had to rewire some of the connections from the new harness to the ignition switch to get the fuel pump to...

Yes I checked the inertia switch but I don't know how to be sure it isn't the problem? Besides resetting it how can I test the inertia switch to ensure it is working correctly?

Ok I've gotten it figured out, thanks for the help! The diagrams are a great source of reference. I have the starter solenoid wired correctly and the motor cranks but the fuel pump doesnt prime. I...

Thanks for the reply, I've since wired the solenoid properly (no smoking connector anymore) and the motor cranks. I will certainly look into replacing the charging harness as well as an upgraded 3G...

Curious what these wires do so I can better understand the electrical system.

9776

9777

This is the connector that started smoking when I connected the negative terminal.
9773

also is this yellow wire connected to the hot side of the starter solenoid? I know the small red elbow...

So I'm attempting to finish the wiring harness replacement I started a couple years ago. I bought the Ron Francis harness back when I started and I've been trying to finish running all the wires...

Here are some pics I could snap before work

This is EGR however I am not running EGR.
8937

This connector says alternator and directions explain this to be the exciter wire which turns the...

So I've been working on my 84 SVO off and on ever since I parked it to rebuild the turbo about five years ago. It sat for a while while i was in school and didn't have time to spend working on it....