Search:

Does anyone know where to get a bracket that would work or have the measurements for the hose wizard kit bracket?

I have felt the urge to re-install an A/C unit in my 86. I kept all the brackets when I removed the old broken R-12 system over ten years ago. But, when I left Hawaii I threw away all the hoses, the...

I made the trip to Phoenix two years ago for the auctions. Barrett-Jackson has the best cars, and just sheer # of cars. It is as much of an event, than an Auction. The Russo Steelse auctions, I felt,...

:like3:

It is all contact pressure. If you stretch it too much, crease it, or screw up, a little heat with my wife's hair drier would return it right back to original shape. Heat will also allow some...

Technically, yes. Kona Blue BOSS 302's have a white roof. I am very happy with how it came out.

Since it was a rainy day I put the Gloss white vinyl on the 2011. Not SVO related but I think it came out well. Plus it shows that if I can do it (and I can be kind of a gorilla), anyone...

One of the problems I had was with the timing. Car was hard to start and acting like a dog. After changing the timing belt, I pulled the plug...whatever it is called...on the distributor and set the...

Snake,
There is some 3M technical info on the Web about how well/ how long this stuff holds up to different UV exposures. I think 2-3 years for the southwest desert. Just google "3M 1080".

JT,
I got "sample" sized pieces off of ebay from a company called "Metromods", they also had the tools and other stuff and videos of the wrap being applied. It goes on dry, and is pull and release...

You can see where I taped over a small mistake. :p

When I was working under the car last summer I used the bottom of the car for leverage installing the lower control arms and my passenger side spat shattered. So, I ordered a new one off of ebay. It...

Son of Bit....! This is the same weekend as the Submarine Birthday Ball. I already have obligations. This is what happens when you don't have a calendar. Sorry.

Registered online and info sent to Scott! Now to find a place to stay.

Is anyone driving their SVO down from the Seattle area. I would really like to make this trip. But, looks like I have to make up my mind pretty soon.

I would also recommended replacing the cam oil seal, Napa part # 17107. I replaced my worn out belt and tensioner, the tighter belt made the fwd cam seal leak and spin oil all over the engine bay!

Thanks for the info Mike, I always thought they were broken!

So they will always flip forward unless under braking? Really?

My seats don't lock into position. Does anyone know where to get new hinges?

Cool. Count it as 4 then!

Mitch, I could get it down there. You going? It would be great to be down there with other SVO's.

Final Stance
5267

Rear Brake, Koni rear lowering springs, and rear control arm pictures I also took a picture of how I thought the rear anti-rattle clip fit.
525852595260526152625263

52535254525552565257In these pics I am showing the anti-rattle clips installed on the Hawk HPS Pads, and the Maximum Motorsports steel Bushings I used in place of the stock rubber-ish type.

After...

I am worried about the clearance between the strut and the sway bar. Sitting on the ground after driving there is about a 1/2 to 3/4 inch gap between the sway bar and the strut.