Those #'s seem pretty low (especially #3 and 4), I would have to assume the gasket has failed at those 2 cylinders. But I would also look further into why the psi is so low on cylinder's 1 and 2 as...
Type: Posts; User: Corrugated; Keyword(s):
Those #'s seem pretty low (especially #3 and 4), I would have to assume the gasket has failed at those 2 cylinders. But I would also look further into why the psi is so low on cylinder's 1 and 2 as...
Check the fan controller / relay under the dash near the steering column, as well as the wiring and connector going into the controller for signs of overheating, etc. I believe there is also a fan...
Hi guys,
Doing some rear suspension work on my 85.5 and considering changing / upgrading the original rear lower control arms. Car is street driven, with some minor suspension upgrades now done...
Looks great!
That is plastic / nylon vacuum tubing. Can't recall where that one goes to and from, but easy enough to repair. Either slide and glue a larger tube over top to reconnect the break, or even use a...
Hi guys,
While inspecting my turbo today, I noticed how bad shape my VAM-to-turbo inlet hose is in. Time to replace it with a hard pipe. I've measured 3" diameter at VAM, 2 3/4" diameter at...
Hi guys,
Might be needing a replacement turbo for my 85.5 (getting a slight whine sound, will be checking impellor condition). I have spoke with Charlie at Evergreen for his solution, but...
Hi brsvo,
I used the Four Seasons 84896 last year, on my 85.5 and it has worked perfectly since.
Thought I may have seen a positive cable on LMR recently as well..
I just finished some rear brake work on my 85.5, the lh rear caliper / cable attachment is from the bottom of the caliper, which will pull the lever forward when the brake handle is pulled up.
...
I used this one for my 85.5:
https://lmr.com/item/LRS-9275A/Mustang-Fuel-Level-Sending-Unit-83-86
It did work, but shows overfilled when tank is newly filled up, then will goto empty quickly...
Thank you, I did get ahold of Paul from SVPV and he does have stock available for these. Prothane 19-1835 will work as well I hear... Energy Suspension 9-13126G may work also, but may be a little...
Hi guys,
Just in the process of replacing my worn / torn / sticking front lower ball joints on my 85.5. I am sourcing a pair of used replacement original lower control arms and joints, but did not...
I was able to find all these fuel parts, lines and clips on the Rock Auto site. Just need to search under Tools and Universal Parts (I believe)...
Great quote, that got me lol'ing for sure! Keep up the good progress on that car!
Hello brotharon,
I used this tool :
http://www.company23.com/products/fordtools/603
when I did my timing belt earlier this year..
I had great success using JB Weld for my spoiler repairs.:like2:9861