My son's 93 GT with new lenses, his running lights are brighter than my headlamps.
Type: Posts; User: SvoGreg; Keyword(s):
My son's 93 GT with new lenses, his running lights are brighter than my headlamps.
I have replaced the plugs, all the wire from the relay to the plugs with two ground wires off each plug. Put new Silver Star headlamp bulbs with the new headlight lenses have 14 volts at the...
I'm not sure of all the specs, I'll make arrangements to get another car to drive and I'll pull the head and take it to the machine shop.
My car is a 1986 SVO Mustang with crowler Sportsman rods,Wiseco forged pistons,windage tray, boport stage 3 head, gutted and Polished upper and lower intake, 65mm t/b, Bob's header, t3t4 Garrett...
No, I have no way to check the spring pressure but everything is new. When the rockers come off it is always in between 2500 and 3000 RPMs at a cruising speed in 5th gear and now I've got it all back...
The tvl is just what it supposed to be.
I remove the lifters, bled them down, reinstall them and rechecked all the clearances between the cam the followers and I got .030 on every one of them so we'll see what happens.
I took this week off to get the pimp installed but first day off this happened.
Not sure any of the spec. on cam, or springs, I bought it from someone that just had all the work done. I have been told to shim the springs but not sure if that is the problem.
I will recheck it, maybe I was off. Thank you for the help.
I did go through the procedure of shimming the hla's and putting lash caps on the valves to get the geometry correct. I could be off if I did not get all the oil squeezed out of the lifters but the...
I have a boport stage 3 head not sure spec. on cam but it is a reduced base Circle cam. Over the last year four times the cam followers have fell out. The first time this happened I put new lifters...
Thanks I will order it today
But can you get it with a serpentine belt clutch? Or can you use the early 90s Mustang compressor hoses and dryer? I am replacing my as soon as I find out what to buy.
I am looking at the lmr ac kit for my 86 svo mustang, does anybody know if you can get it with the serpentine belt clutch. I have converted mine to serpentine belt, or does anybody know of a better...
Thank you, I will check it today and get back.
I did check voltage with both test leads at the plug, and I cleaned the grounds, will try to replace/add ground to the plug. I am 42 and can't see at night as good as i once could. This car has been...
I have a 1986 svo mustang with new headlight's and relays, grounds are good, getting about 14.2 volts to the bulbs while running but are still so dim you can hardly tell that there on any ideas?