Results 1 to 9 of 9

Thread: My old setup

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Building Boost AKA BB's Avatar
    Join Date
    Jul 2011
    Location
    Iraq
    Posts
    22

    Thumbs Up My old setup

    FEW OF MY DYNO CHARTS....

    A237 Cam and Honestly the best looking Dyno i have ever seen from my setup.

    http://i93.photobucket.com/albums/l5...S/Dyno5run.jpg
    Dyno5run.jpg

    Here is a comparison of my home ported head VS Bo's ported head with a Stg1.9 cam from Bo for both dyno's.
    Keep in mind my turbo was maxxed out at 400+whp, thats why peak numbers aren't much higher...

    http://i93.photobucket.com/albums/l5...selineSTG1.jpg
    BoportbaselineSTG1.jpg

    Last but not least, low Boost (22psi or so) Ranger ORller vs a Stg 3 Boport.. Bigg difference in power.

    http://i93.photobucket.com/albums/l5...DYNOS/Dyno.jpg
    Dyno.jpg

  2. #2
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    Is that with a stock EEC?
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  3. #3
    What's that tapping sound?? Chalky's Avatar
    Join Date
    Jul 2011
    Location
    In or near Portland. OR
    Posts
    527
    What are the specs on the rest of the set-up????

  4. #4
    Half Boost Raven855's Avatar
    Join Date
    Aug 2011
    Location
    Tulsa, Ok
    Posts
    661
    His specs are over on TF if you are interested.

  5. #5
    Building Boost AKA BB's Avatar
    Join Date
    Jul 2011
    Location
    Iraq
    Posts
    22
    Sorry guys this took so long to update, just been busy...

    Lets see

    Boport head Stg3
    1.9 cam, but i ran MANY other ones...
    gutted knife edged intake
    60mm TB
    Custom FMIC
    SC50 trim turbo
    MotionD Header (no longer available)
    3" DP and elbow
    28psi
    28*total timing
    105 octane
    PE comp with MAF conversion,
    65lbs injectors
    45psi base FP

    I'm sure there's more.... i just can't remember...
    Short block was a bone stock unit with ARP rod bolts....well TRW forged pistons

  6. #6
    Noob
    Join Date
    Oct 2013
    Location
    Chico, CA
    Posts
    20
    Nice

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •