Page 1 of 3 123 LastLast
Results 1 to 20 of 51

Thread: 2.3 Turbo manual available for Bellevue and Sturgis

  1. #1
    Moderator

    (aka Anonymous) Club Member Patrick's Avatar


    Join Date
    Jun 2011
    Location
    I live under the moss-covered bridge
    Posts
    1,049

    2.3 Turbo manual available for Bellevue and Sturgis


    The Complete Turbo 2.3L EEC-IV Handbook

    3rd edition now includes a 11x 17 foldout page of the ECA operating modes and the sensors and actuators. There is also a new table of ECA control algorithms and sensors and actuators. Additionally there is some information about "FMEM".

    Slocumbook.jpg

    The 2nd edition added a 11x17 page of all the pinouts on the ECA's used on the 2.3L turbo FORDS. This page has a table of pinouts, pin application, signal name, and test spec and definition.
    This book covers the EEC -IV (Electronic Engine Control, type 4) installed on turbocharged FORDs. It's purpose is to: educate the reader, assist in troubleshooting problems, and provide information to allow the reader to perform modifications (not for street use, of course). There are 7 chapters: component locator, fuel injection components, EEC pin out, EEC self tests, other engine components, glossary, and bibligraphy.

    The two sections on components cover all the components that make up the EEC-IV. The sections on ECC pin-out, and self-test are set up specifically for testing and diagnosing the EEC-IV system. The EFI component section has engineering data for most components. The section on other components covers performance aspects of the turbo, intercooler, and gasoline. Finally, the bibliography covers the reference material that was used to assemble this book.

    The book is 8 1/2 x 11 with plastic covers and plastic 'comb' binding. The book is designed for long life under the hood and on the bench.

    "It's extremely clear, concise and well-organized information makes it an essential addition to the XR4ti, SVO, or Turbo Coupe owner's tuneup and diagnostic toolbox.":Roland Zuk

    "Nowhere else before, was all this information available in one place, at such a reasonable cost, and in plain language that's understandable.": Dave Compton

    Price (plus shipping): $20 (Editor's note: Need to calculate shipping costs for mail orders)

    Save shipping charges and pre-order for delivery at Knott's CA, Bellevue WA, or Sturgis Mustang Rally SD events in 2013.

    Slocumbookintro.jpg

    (PM Meotchh , our treasurer paypal request for payment here)
    Attached Images Attached Images
    "Just leave me alone. I know what to do" (Kimi)

  2. #2
    Noob
    Join Date
    Apr 2013
    Location
    Pomona, California
    Posts
    1
    If I would of known I would of taken one of these from you Patrick.

  3. #3
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Jr, the books are still available. Let me know if you still want one & I will pm you with the total with shipping.
    There's nothing more to see here, now move along...

  4. #4
    Moderator

    (aka Anonymous) Club Member Patrick's Avatar


    Join Date
    Jun 2011
    Location
    I live under the moss-covered bridge
    Posts
    1,049
    Quote Originally Posted by Meotchh View Post
    Jr, the books are still available. Let me know if you still want one & I will pm you with the total with shipping.
    The 2.3 Turbo book from Fleming is available too, for $15. It would probably fit in the same $5.60 USPS shipping package.
    "Just leave me alone. I know what to do" (Kimi)

  5. #5
    Half Boost SVOC's Avatar
    Join Date
    Sep 2012
    Location
    Bastrop, Tx
    Posts
    509
    Mitch/Pat would you calculate a total for BOTH books going to 78602

    Thanks, Jeff

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Originally Posted by Meotchh
    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Anyone who owns an SVO belongs in a Psychiatric hospital.

  6. #6
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Jeff,
    I just sent you a PM
    There's nothing more to see here, now move along...

  7. #7
    Half Boost SVOC's Avatar
    Join Date
    Sep 2012
    Location
    Bastrop, Tx
    Posts
    509
    Thanks Mitch

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Originally Posted by Meotchh
    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Anyone who owns an SVO belongs in a Psychiatric hospital.

  8. #8
    Half Boost SVOC's Avatar
    Join Date
    Sep 2012
    Location
    Bastrop, Tx
    Posts
    509
    Thanks


    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Originally Posted by Meotchh
    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
    Anyone who owns an SVO belongs in a Psychiatric hospital.

  9. #9
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    No problem Jeff, glad you got em. Quantities of Alan Slocom' s book are running dry. I'm down to the last two copies. It might be several months before we get more.
    There's nothing more to see here, now move along...

  10. #10
    Some Boost Laredo's Avatar
    Join Date
    May 2012
    Location
    Stillwater, MN
    Posts
    410
    Will there be more available for Sturgis? I would like to get a copy also.
    Bad choices make great stories....!

  11. #11
    Building Boost Jack B's Avatar
    Join Date
    May 2012
    Location
    Lincoln Univ, PA
    Posts
    58
    Are there any left? I would like a copy if you can mail one.

    thanks,
    jack

  12. #12
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Jack,
    We are waiting for more copies of Alan Slocum's book. We'll post an update when we have more in stock.

    We do still have copies of Fleming's manual. Send me a PM if you want to place an order.
    There's nothing more to see here, now move along...

  13. #13
    Some Boost SVOfish's Avatar
    Join Date
    Jun 2013
    Location
    KC
    Posts
    126
    I would like both of these books. Please PM me with more info.

  14. #14
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Quote Originally Posted by SVOfish View Post
    I would like both of these books. Please PM me with more info.
    At this time we are out of stock on Alan Slocum's manual & we do not have an eta on when we will receive more prints. We do have several copies of Mike Fleming's manual.
    If you are interested in purchasing a copy of Fleming's manual, shot me a PM & I'll send you a PayPal invoice.

    We will post an update when we have restocked with Slocum's manual.
    There's nothing more to see here, now move along...

  15. #15
    Some Boost FoxBuddy's Avatar
    Join Date
    Aug 2013
    Location
    Calgary, AB
    Posts
    317
    Quote Originally Posted by Meotchh View Post
    We will post an update when we have restocked with Slocum's manual.
    Looking forward to it. I'm new to this and I need to soak up all I can!
    Darran
    1986 9L SVO, 1982 1C GT

  16. #16
    Noob
    Join Date
    Oct 2013
    Location
    Chico, CA
    Posts
    20
    Any left?

  17. #17
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    Whicn "any"? SVOCOP hat, Proud hat or manuals? I will check stock on Wednesday.
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  18. #18
    Half Boost Ford Builder's Avatar
    Join Date
    Jan 2013
    Location
    Ridgetown Ontario Canada
    Posts
    526

    Question

    I would like, Slocums Turbo hand book when they come available .
    The Machine speaks for itself !!

  19. #19
    Noob
    Join Date
    Jul 2013
    Location
    Bellingham, WA
    Posts
    3
    I would like an Slocums Turbo book if and when available.

    Thanks

    Also where would somebody get a turbo rebuild?
    I'm in Bellingham , WA

  20. #20
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    I'm checking on the status of Slocum's book. I hope to have an update by next week.

    As for TC rebuilding, there is an outfit near Portland that a couple guys down there have used with some success., Otherwise, you can ship it to Charlie at Evergreen.
    There's nothing more to see here, now move along...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •