Page 1 of 2 12 LastLast
Results 1 to 20 of 24

Thread: SVOCOP Replacement OE Stainless Steel oil supply lines for 2.3 Turbo.

  1. #1
    Noob Vendor Flat Bob's Avatar
    Join Date
    May 2012
    Location
    Holmes' Garage
    Posts
    13

    SVOCOP Replacement OE Stainless Steel oil supply lines for 2.3 Turbo.

    SVOCOP Replacement OE Stainless Steel oil supply lines for 2.3 Turbo.

    Direct replacement stainless steel oil supply lines for SVO, Turbo Coupe are now in. Will fit Merkur and Turbo GT as well.

    Pre order now! Ready for delivery at Knotts. Show special price is $36.00. After Knotts, they will be made available plus shipping ($18.85 shipping charges
    USPS as of 2017) or local pick up in certain areas of the country.

    Turbo manufacturers and rebuilders many times require a new oil supply line to be installed as a term of warranty, to assure that the old coked up line will not be a lubrication issue with a new installation.


    oilline1.jpgoilline2.jpgoilline3.jpgoilline4.jpgoilline5.jpg

    The shipping for the lines is $18.85 (Per USPS as of 7/20170)* for up to 5 lines. Shipping is USPS priority flat rate. Additional charges for shipping out of the US may apply.

    Price per line shipped:
    Qty 1 w/shipping = $49.45
    Qty 2 w/shipping = $85.45
    Qty 3 w/shipping = $121.45
    Qty 4 w/shipping = $157.45
    Qty 5 w/shipping = $193.45
    Qty 6 or more**

    *Price is subject to change with changes in shipping rates or changes in shipping provider. Any changes due to shipping will be noted in the PM reply & invoice.
    **For orders greater than 5 please send me a PM Meotchh or Patrick with the request & we will work out the shipping costs.

    ***Discounts may apply for local pickup.
    General locations are TX, KY, AZ, & WA. Please inquire about local pickup in your PM & will indicate if it is available in your specific location.


    We will accept paypal or cash.

    TREASURER@WWW.SVOCOP.COM

    All proceeds will go back to the club to be used toward future club activities, beverages, and carnivore type meals. EOM.

  2. #2
    Some Boost
    Join Date
    Oct 2012
    Location
    Fort Worth TX
    Posts
    366
    Are these for all year SVO's?

  3. #3
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Yes they are Dave. They will fit all Ford 2.3T stock configurations.
    There's nothing more to see here, now move along...

  4. #4
    Building Boost Honorary Member
    Join Date
    May 2012
    Location
    great falls, mt
    Posts
    70
    if i am not mistaken the turbo feed line on my my 87/88 tbird uses a different configurtion.
    bob

  5. #5
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Quote Originally Posted by firsthero View Post
    if i am not mistaken the turbo feed line on my my 87/88 tbird uses a different configurtion.
    bob
    Bob, you are not mistaken. However, this line will work as a replacement. The only difference is the SVO line has a couple extra bends due to intercooler brackets which are different on the TC. Keep in mind, the line starts & ends at the same point with no interference. We will eventually try to get some pics of the line installed on various Ford 2.3T stock configurations.

    We cannot gaurantee fitment if there are aftermarket upgrades installed. But, if those upgrades do not interfere with the stock 'turbo oil feed line', you should be good to go.
    There's nothing more to see here, now move along...

  6. #6
    Building Boost
    Join Date
    May 2012
    Location
    Havre de Grace, MD
    Posts
    94
    Can I order one now and get it shipped to MD? Thanks!

  7. #7
    Some Boost
    Join Date
    Oct 2012
    Location
    Fort Worth TX
    Posts
    366
    I would like to get also, shipped to Ft Worth TX 76123

  8. #8
    Building Boost dznj's Avatar
    Join Date
    May 2012
    Location
    Southwick, MA
    Posts
    88
    Would like to order one as well, while my motor is out of the car! 01077
    No good deed goes unpunished!
    1985.5 SVO 1B

  9. #9
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    I hope to have the shipping price posted tomorrow. Those looking to save on shipping can consider local pickup if you are in or near any of the following cities:
    Dallas, TX
    Louisville, KY
    Puyallup, WA
    Prescot, AZ

    They will also be available at Knott's for $36.00, as previously mentioned. Payment will be accepted via Paypal or cash.
    There's nothing more to see here, now move along...

  10. #10
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    The shipping for the lines is $13.45* for up to 5 lines. Shipping is USPS priority flat rate. Additional charges for shipping out of the US may apply.

    Price per line shipped:
    Qty 1 w/shipping = $49.45
    Qty 2 w/shipping = $85.45
    Qty 3 w/shipping = $121.45
    Qty 4 w/shipping = $157.45
    Qty 5 w/shipping = $193.45
    Qty 6 or more**

    *Price is subject to change with changes in shipping rates or changes in shipping provider. Any changes due to shipping will be noted in the PM reply & invoice.
    **For orders greater than 5 please send me a PM Meotchh or Patrick with the request & we will work out the shipping costs.

    ***Discounts may apply for local pickup. General locations are TX, KY, AZ, & WA. Please inquire about local pickup in your PM & will indicate if it is available in your specific location.


    We will accept paypal or cash.

    TREASURER@WWW.SVOCOP.COM

    All proceeds will go back to the club to be used toward future club activites.
    There's nothing more to see here, now move along...

  11. #11
    Noob
    Join Date
    Jan 2013
    Location
    Bath, PA
    Posts
    13
    I'm looking for the flexible, stainless steel braided oil feed line I think Pat used to make. Are those still available?

  12. #12
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Quote Originally Posted by SVOninjaboy View Post
    I'm looking for the flexible, stainless steel braided oil feed line I think Pat used to make. Are those still available?
    You'll need to contact Pat on that. I'm not sure if he has any more of those remaining.
    There's nothing more to see here, now move along...

  13. #13
    Some Boost
    Join Date
    Jul 2012
    Location
    Phoenix, AZ
    Posts
    298
    Okay its three years later, and I need one. But why buy one when you can get two for twice the price, eh?

    Are these still available and how do I order them?

  14. #14
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    They are still available. Send me a PM with the quantity you need & your paypal address. I will follow up from there.
    There's nothing more to see here, now move along...

  15. #15
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    For those interested in the SS turbo oil feed line, please note the updated pricing due to increases in USPS shipping rates. Also note the updated pickup locations if you are interested in local pickup.

    Additionally, the lines may be available for local pickup at many major shows throughout the country if any of the BOD members stocking the lines are attending.
    There's nothing more to see here, now move along...

  16. #16
    Moderator

    (aka Anonymous) Club Member Patrick's Avatar


    Join Date
    Jun 2011
    Location
    I live under the moss-covered bridge
    Posts
    1,049
    I can have oil lines at the Mustang show at the In-N-Out in Prescott on October 1 for those who want them locally without shipping charges.
    "Just leave me alone. I know what to do" (Kimi)

  17. #17
    Moderator

    15 CP DaveS's Avatar


    Join Date
    Sep 2011
    Location
    Goshen, KY
    Posts
    445
    I just installed one of these lines and the fit was perfect. All other lines, I've had to adjust a bit to fit, this one fit without any adjustment. Highly recommended!
    The car it was installed on is stock, complete with the factory intercooler.

  18. #18
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Thanks for the payment Dave & the extra donation to the club!

    Quote Originally Posted by DaveS View Post
    I just installed one of these lines and the fit was perfect. All other lines, I've had to adjust a bit to fit, this one fit without any adjustment. Highly recommended!
    The car it was installed on is stock, complete with the factory intercooler.
    There's nothing more to see here, now move along...

  19. #19
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    APRIL TAX SEASON SPECIAL!!

    Buy 5 oil lines & receive free shipping. That's $180.00 for 5 oil lines & we pick up the shipping. Orders need to be paid for before May 1, 2017. Quanities are limited so this deal will go on through the end of the month or until we sell out of lines.

    There's nothing more to see here, now move along...

  20. #20
    Noob
    Join Date
    Jun 2017
    Location
    tecumseh ontario canada
    Posts
    12
    I just purchased a svo and am rebuilding it are these lines still available

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •