turbo to intercooler tubing, couplers and cheap BPV

[in2fords]

Looking for a cheap bypass valve, couplers sizes 3" straight and 2.5-2" 45degree, 7 inch tube 2.5" with connection for bypass valve. Thanks, Jeremy

[SVO4PWR2]

I might have what you need and at the right price . . .i owe ya

Let me check tonight.
-RICH-

[in2fords]

Sounds good Rich, this time it will be Postal MO

[in2fords]

OK, got the silicone parts and valve, all I need now is a straight 3" connector in aluminum or stainless, a 45 degree 2.5 to 2" about 5
inches long reducer in stainless or aluminum and 2x 2.5" clamps, 2x 3" clamps
and 2x2" clamps.
Thanks, Jeremy

[Meotchh]

Jeremy,

Did you check with Columbia River Mandrel Bending? They carry every thing you're looking for. http://www.mandrel-bends.com/catalog/

[in2fords]

Good knowledge, Thanks Mitch

[MikeFleming]

all I need now is a straight 3" connector in aluminum or stainless, a 45 degree 2.5 to 2" about 5
inches long reducer in stainless or aluminum

How long a piece of 3" alum tube you need? I've got some scraps available. Pay for shipping.

[in2fords]

Awesome, Just long enough to join to pieces of silicone, 3"long would be perfect. Let need know best payment method
Thanks a lot, Jeremy

[MikeFleming]

Just to be clear: 3" diameter (OD) by 3" long? or 2.5" diameter by 3" long?

PM me a shipping addy.

[in2fords]

3x3
Pm on its way

[MikeFleming]

I'll dig through what I have tonight.

[in2fords]

Sweet, Thanks

[GLASSMAN]

I have a bosch bpv

[GLASSMAN]

I also have a inner cooler ,,, and custom tubes.... Give me a call ,,, or come up on sunday

[in2fords]

I got a bpv but not sure on its condition yet.
Maybe we can work out a trade, maybe get that new atc 70 frame powder coated hot pink for the girls in your life?

[MikeFleming]

... powder coated hot pink for the girls

Or to match his eyes??

[in2fords]

I can't make too much fun of him, the pink PC is left over from doing my fiancée motor but now that the stang is down guess who is driving it

[in2fords]

ALLRIGHT thanks to the members here I have all the parts to get my car running I don't think I need anything else. Im running it without a intercooler for now just to get it running, in the meantime I will modify the FMIC I got from Glassman, clean and powder coat the parts and get it ready to install. Thanks guys

[MikeFleming]

^
More pink?

[in2fords]

^
More pink?

Im trying to keep all the pink on her explorer and away from my capri and stang Im doing all the mocking up today, tomorrow I fab and weld up the wastegate actuator mount for the t4 housing and hopefully get to start it, finger crossed Now onto my next project, Im getting the intercooler mocked up. Then the next project is I will be ordering a wastegate housing with a 2.5" v flange and try to build a 3" down pipe from that.