Page 1 of 6 123 ... LastLast
Results 1 to 20 of 101

Thread: Mac Tools "giveaway" car - first day of production for 1985. FF100805

  1. #1
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493

    Mac Tools "giveaway" car - first day of production for 1985. FF100805

    Hi
    Seems fitting to let you in on the recent project for THESVOTRUST. Seems we all help each other - Kendal Coker found this car a couple of years ago. HE contacted me - as the owner of the MacTools Race Car and said "you should buy this". (At the time I said - No, why and "I sold a 85.5 Comp Prep because I didn't want to use my NOS parts to restore it" (and that was a 85.5 Comp Prep). Ten minutes I owned it. (sixth car sight unseen - but not the worst)

    Brought to MI in 2011 the car needed valve seals, brake work and to be repainted.

    After documenting the spray patterns , as well as the original stickers (slightly different than those Andy reproduced for the 1984 car) I started disassembly in the winter of 2012.



    Rear hatch had contacted the roof
    Tim my friend of TPC Refinishing did great metal work to make right and fit TONY W's red hatch


    Before and after doors






    We used NOS front end to save some time on fender and hood work! (sold the hood in Carlisle for 37.00)


    Bought a header for Bill C (THX) in Carlisle


    Car has been blocked and we will start paint tomorrow 10-24-2013.




    Paint has been bought, we are painting the same way Bobby Fehan (Mac Tools Driver) painted these two cars in the 1983 and 1984. (note spray patterns)


    I have invited Bobby to come and paint the red and yellow trim (next spring) but getting him here isn't easy ! (think I have to go through his wife, as she can rangle him into the trip)

    This is an exciting project for me. I swore I was finished restoring cars after the 9 year SCJ adventure. But true to my SVO devotion - I knew I could do this car faster and without the need of research and date coded parts hunting.

    Mostly I am excited as I intend to register and drive the car. It is an important piece of SVO history and I'm thankful BOTH cars are together.

    Mark
    P.S. Will continue to update this thread with progress photos. Really don't have a time frame for finishing the car - right now we want to get color on it before winter.

  2. #2
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    PHoto limits had me remove 7 photos
    Here are some others (no longer in order)








  3. #3
    Some Boost Sick Puppy's Avatar
    Join Date
    Aug 2011
    Location
    Lebanon, CT, USA
    Posts
    340
    Lookin' good Mark. Great to see another piece of history saved!
    86 SVOs = 2A - Drag & 2R - Driver & 1C - Rusty
    84 GT Turbos = 'verts & hatch

  4. #4
    Some Boost Kendal Coker's Avatar
    Join Date
    Feb 2012
    Location
    Decatur Alabama
    Posts
    303
    looking good, the cars should be together.

  5. #5
    Some Boost bluemax's Avatar
    Join Date
    Sep 2012
    Location
    LaGrange, GA
    Posts
    160
    Nice progress Mark! Makes me want to start another project....
    1986 2R Comp Prep
    1986 9L Comp Prep

  6. #6
    Some Boost Sick Puppy's Avatar
    Join Date
    Aug 2011
    Location
    Lebanon, CT, USA
    Posts
    340
    Quote Originally Posted by Kendal Coker View Post
    looking good, the cars should be together.
    Road trip for photo shoot!
    86 SVOs = 2A - Drag & 2R - Driver & 1C - Rusty
    84 GT Turbos = 'verts & hatch

  7. #7
    Half Boost Ford Builder's Avatar
    Join Date
    Jan 2013
    Location
    Ridgetown Ontario Canada
    Posts
    526

    Wink

    Looking good! if you need a hand with the build let me know, my car is almost finished.
    The Machine speaks for itself !!

  8. #8
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Thanks All!

    Did some cut in today !


    Mark
    P.S. Ray - your care package came today . THANKS! Boy Canadian postage is expensive. Turns out I did need that bracket too !

  9. #9
    Half Boost
    Join Date
    May 2012
    Location
    Duncannon PA
    Posts
    521
    Looks all to familiar! Two cars in two summers is enough for me for a while. And as I say that I have a '68 mustang to completly primer and paint inside and out, and my brother in law's Pinto cruisin wagon when he gets it ready. Plus I think I am helping him replace the cowl in the Pinto.

  10. #10
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Not going to get an sympathy from this crowd - I know ! Doing three car simultaneously, two here one in AZ.
    Never thought we would need two rotisseries, two plasma cutters, two welders etc etc etc

    Mark

  11. #11
    Half Boost Ford Builder's Avatar
    Join Date
    Jan 2013
    Location
    Ridgetown Ontario Canada
    Posts
    526
    Yes am too a brute for punishment am going to start on my 58 Bermuda 9 pass wagon after the svo is wrapped up.
    The Machine speaks for itself !!

  12. #12
    Half Boost Ford Builder's Avatar
    Join Date
    Jan 2013
    Location
    Ridgetown Ontario Canada
    Posts
    526
    Hay no problem Mark, am glad you needed that brace too. yes we do pay a premium for postage.
    The Machine speaks for itself !!

  13. #13
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Quote Originally Posted by Ford Builder View Post
    Yes am too a brute for punishment am going to start on my 58 Bermuda 9 pass wagon after the svo is wrapped up.
    OMG ! Just put the dash back in the 8 passenger Country Squire -after getting home from working on the SVO!!

  14. #14
    Half Boost Ford Builder's Avatar
    Join Date
    Jan 2013
    Location
    Ridgetown Ontario Canada
    Posts
    526
    Fond memorys , can't to get started .
    The Machine speaks for itself !!

  15. #15
    Some Boost JTurbo's Avatar
    Join Date
    May 2012
    Location
    Granville, MA
    Posts
    297
    Looks good so far Mark.
    1979 Pace Car ~ 1982 GT T-Top
    1986 1C SVO ~ 1986 GT vert

  16. #16
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Quote Originally Posted by JTurbo View Post
    Looks good so far Mark.

    Thanks - really want to try and keep the project page updated.
    We did alot today - with fitment. Transferred brackets and parts to the NOS parts.



    Mark
    P.S. Looks like I'll have a header panel for someone that has none! (Think we want an "all you can eat crab dinner for three" for it. (pick up in MI or deliver to AZ in January)

  17. #17
    What's that tapping sound?? Chalky's Avatar
    Join Date
    Jul 2011
    Location
    In or near Portland. OR
    Posts
    527
    Looking good mate!!! Keep the pics coming!!!

    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  18. #18
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Hay Chris
    Getting colors on!


    Plan is to paint car White on Sunday!

  19. #19
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Last of the red and yellow from 1984!


    Painting tomorrow 11-3

  20. #20
    Some Boost TheSVOTrust's Avatar
    Join Date
    Dec 2011
    Location
    Brighton MI -Home of the Boss 429's
    Posts
    493
    Sealed by 10AM


    Mark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •