When I was working under the car last summer I used the bottom of the car for leverage installing the lower control arms and my passenger side spat shattered. So, I ordered a new one off of ebay. It came unfinished and has sat in my den ever since. While researching stuff for another project I came upon this stuff. So I ordered a square foot and tried it out. Not perfect but not bad and totally reversable later on. The square foot of vinyl wrap cost about the same as a can of spray paint. The Gloss black really matches up nice with the gloss black 1C and the matte grey is darn close to SVO gray.IMG_1159.jpgIMG_1164.jpg