I need to replace the screws in my bi wing with the correct ones. Can anyone help here? Thanks!
I need to replace the screws in my bi wing with the correct ones. Can anyone help here? Thanks!
Dark Charcoal Metallic (2A to 9W)
225/50/17 on 2005 GT Premium Rims
70k miles
National Parts Depot has them.
Thanks Mike!
Dark Charcoal Metallic (2A to 9W)
225/50/17 on 2005 GT Premium Rims
70k miles
Thanks for the link. I'm replacing the upper wing due to sagging and a couple of cracks. The original on the car had only the stud and one screw hole on each side while the replacement looks to have had no stud and two screw holes on each side. Can someone shed some light? Thanks!
Darran
1986 9L SVO, 1982 1C GT
IIRC the upper has small tabs that go under the lower and are secured with screws that go through the upper section of the lower and through the tabs from the upper.
Each side of the upper, about centered, has thread-in studs (threads into the wing arm support casting) and protrudes ~2" into the hatch metal for a retaining nut on the inside of the hatch.
And two additional screws at the top of the upper wing arms.
I have pics of all that stuff somewhere.
Helping SVO owners & racers since 1984
Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite