Looking for Lower Control Arms. Condition of ball joint not important
Call Ken @ (214) 856 5124
Looking for Lower Control Arms. Condition of ball joint not important
Call Ken @ (214) 856 5124
I have a set just need to separate shock & rotor in my spare time you can have them for the cost of shipping. Let me know Tom 763-607-2101
There's nothing more to see here, now move along...
Meotchh,
I don't mind the freight costs.You do not want to go to the airport with that much metal in your luggage. Just tell me how much money you need and where to send it.I live in McKinney just 30 min N of Dallas...If you want to see a stunning gorgeous 1986 all stock with 11,000 miles...just give me a call. The LCA will be used on my SVO.
Ken @ 214-856-5124
tommyb,
Thank you for the response. The club itself has a few sets so I will buy one of those.
Please let me know if I can ever help you find anything
Ken
Is anyone currently machining out the ball joints?
Meotchh,
No need for pics. Just pick out a set with original ball joints still in it. Then tell me how much and where to send the money.
My guy did not want the set with already machined out joints. He wanted to see it in stock form and machine them out himself!!
Thanks,
Ken
Be sure and tell him that it is HARDENED! If he is not prepared for that you will ruin an arm or bit.
Meotech,
Okay..also tell me where to send the money.
Thanks
Ken
Ken,
You've got email. I sent you the shipping pricing & the paypal account info. Call or email if you have any questions.
Thanks,
Mitch
There's nothing more to see here, now move along...
Raven.
Okay, Mitch sent me the Lower Control Arms. Any suggestion on which ball joints and adaptor set to replace the stock sealed ball joints???
Regards,
Ken Mattice
()214) 856 - 5124
Ken,
The control arms are on their way via fedex. You should see tracking updates in your email. ETA is 12/1/17. I'll give you a call when we're in DFW next month. Hopefully I can make some time to meet up & check out your SVO.
Thanks again for supporting the club with your donation!!
There's nothing more to see here, now move along...
The control arms arrived today in good condition..Look forward to meeting you when you are in the Dallas area
Just give me a call at (214) 856 - 5124
Regards,
Ken
For the ball joint use the low friction SN95 from Napa 260-1463. The Steeda X2 ball joint will also work. For the adapters use the adapters from Maximum Motorsports MMFCAB-10. They have urethane control arm bushings also 6-208-BL.
I’ve been working on a ball joint that can be used without the adapters.
I have the ball joint part number that I was using for stock SVO spindles it didnt require the taper adapter.... it was from an 80's tbird iirc....but i could be wrong
Let me find where I wrote it down
I had the number for a 68 Chevy balljoint that was supposed to be right
The balljoint required for the SVO spindle is from a Lincoln Mark VII
the Napa part number I have is 260-1386 or Moog K8471