-
Bell intercooler core, polished housing and seals
I've changed direction and purchased a FMIC. This is for the Bell high-flow core, a polished housing and the stock intercooler seals. Please note, you will have to disassemble this and modify the stock seals to use this. I tried to use some silicone gasket material and was not able to get this sealed. The core is brand new, having spent about 3 minutes on the motor. The housing is polished, but could still use some additional elbow grease. Looking to get $200 plus shipping. Paypal only.
https://ibb.co/jFeuJJ
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules