Results 1 to 20 of 22

Thread: Water pump....

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319

    Water pump....

    So how difficult of a job is it to replace the water pump? I swear this car is cursed.

  2. #2
    Noob
    Join Date
    Mar 2017
    Location
    Tampa
    Posts
    10
    If you’ve done a timing belt then it shouldn’t take more than a few more minutes to pull the pump.


    Sent from my iPhone using Tapatalk

  3. #3
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319
    Quote Originally Posted by luxy72 View Post
    If you’ve done a timing belt then it shouldn’t take more than a few more minutes to pull the pump.


    Sent from my iPhone using Tapatalk


    So, I have to do the timing belt again to replace the pump?

  4. #4
    Some Boost
    Join Date
    Jun 2012
    Location
    Acworth, GA
    Posts
    221
    No, it;s an easy job. remove the belts, then the water pump pulley and then 3 bolts. The biggest trouble will be finding a water pump with the correct diameter pilot shaft.

  5. #5
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319
    Quote Originally Posted by Mike S View Post
    No, it;s an easy job. remove the belts, then the water pump pulley and then 3 bolts. The biggest trouble will be finding a water pump with the correct diameter pilot shaft.
    What is the correct diameter and part #?

  6. #6
    Some Boost
    Join Date
    Jun 2012
    Location
    Acworth, GA
    Posts
    221
    Quote Originally Posted by majestic View Post
    What is the correct diameter and part #?
    The stock unit on my 86 was 3/4" with the v-groove pulley. The serpentine setup that I have from a 91 mustang is 5/8".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •