Just bought my SVO and need to replace the brakes. So I see a lot of high performance replacement rotors without the studs. Looks like I'd need to knock out the original studs or order them and hammer in place, yes? Thanks and sorry if its an obvious question. Kaz
Spray some Pb Blaster it will help knocking them out.
Your Best Bet, Hire a Vet!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
What rotors are you specifically looking at? I have purchased multiple performance rotors over the years, all came with studs already installed.
As for removal replacement, if you can - avoid "hammering" studs in and out. The preferred method would be to push them in/out with a press.
Any automotive machine shop will do it for a minimal fee, probably less than $20.
Bad choices make great stories....!
Thanks. After more careful searching I did find rotors with the hub and studs as an assembly. Thanks for your patience.
Reply With Quote
