Results 1 to 5 of 5

Thread: Sensor plug identification

  1. #1
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319

    Sensor plug identification

    Where does this connect? It comes from the same harness where the oil pressure sensor and the sensor under the lower intake are. It is single dark green wire.
    sensor.jpg

  2. #2
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    Looks like the oil level sensor in the sump. That's about the only single-wire there besides the 1984/85 coolant temp fan switch, the oil pressure sensor and the coolant temp sensor on the back of the block, intake side..
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  3. #3
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319
    Quote Originally Posted by MikeFleming View Post
    Looks like the oil level sensor in the sump. That's about the only single-wire there besides the 1984/85 coolant temp fan switch, the oil pressure sensor and the coolant temp sensor on the back of the block, intake side..

    So where would that connect? I don't think we would have disconnected it when replacing the head?

  4. #4
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    85.5/86?

    Left (drivers) side in the oil pan.
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  5. #5
    Some Boost
    Join Date
    May 2012
    Location
    Arkansas
    Posts
    319
    Quote Originally Posted by MikeFleming View Post
    85.5/86?

    Left (drivers) side in the oil pan.

    Thanks, Mike!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •