Happy New Year!
A couple of years ago, I replaced my clutch, pressure plate, and throw out bearing and I also went with a MM aluminum clutch quadrant and adjustable cable. At first everything was fine, but after the car sat for a while, I noticed squeaking/squealing when I depressed the clutch pedal. It wasn't bad and would go away after I used the clutch a few times. It sat for almost a year during covid and doesn't get driven much anyway, and the noise has gotten worse and doesn't really go away like it did. Also, it feels like the clutch pedal is getting harder to depress. I don't see anything that is obviously wrong. When I replaced the clutch, I put a steel snout on the transmission. I also replaced the bushings in the clutch pedal pivot shaft. Any suggestions? Thanks