Results 1 to 14 of 14

Thread: How to Choose the Right Spark Plug???

  1. #1
    What's that tapping sound?? Chalky's Avatar
    Join Date
    Jul 2011
    Location
    In or near Portland. OR
    Posts
    527

    How to Choose the Right Spark Plug???

    Ok, so we all know that the factory spec replacement for the SVO is the Motorcraft AWSF32-C, but if you want to go with something else, apart from looking at the parts store webpages for a recommendation, how do you decide the correct plug for your engine?? How do you determine the correct heat range etc?? Experts, please chime in!!!!

  2. #2
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Stock? Modified?
    There's nothing more to see here, now move along...

  3. #3
    What's that tapping sound?? Chalky's Avatar
    Join Date
    Jul 2011
    Location
    In or near Portland. OR
    Posts
    527
    Exactly!!! an answer on both senarios would be helpful

  4. #4
    Moderator Bob Holmes's Avatar
    Join Date
    Jul 2011
    Location
    North of Pat, south of Meotch
    Posts
    896
    At one point I used to recommend the NGK TR5, however, after several broken porcelain incidents I believe that plug is too hot and now use the TR6.
    Enough of that, it was giving me a headache.

  5. #5
    What's that tapping sound?? Chalky's Avatar
    Join Date
    Jul 2011
    Location
    In or near Portland. OR
    Posts
    527
    I've been using the NGK TR5 IX for years with no problems but someone recently said it was too cold a plug. I was wondering how to determine that??

  6. #6
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    If you start having cold-start and idling issues where the plugs are fouling, then it's too cold. Otherwise, you're good to go.

    Someday I'll post a pic of how/where to read the actual temp of the electrodes. But it's tired and I'm late now.
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  7. #7
    Moderator Bob Holmes's Avatar
    Join Date
    Jul 2011
    Location
    North of Pat, south of Meotch
    Posts
    896
    Chalky, it most definitely is not too cold. NGKs numbering of plugs for heat range is backwards from everone else's, so that may have been why you recieved that advise. I broken porcelains with the TR5s on a consistent basis, which is an indication of too high a heat range. Changed to TR6s and it eliminated the problem. This was on the racecar.
    Enough of that, it was giving me a headache.

  8. #8
    Red Captain MikeFleming's Avatar
    Join Date
    Jun 2011
    Location
    Tucson, AZ. USA, Earth
    Posts
    5,081
    I broken porcelains with the TR5s on a consistent basis, which is an indication of too high a heat range.
    That's also a sign of rampant detonation.
    Helping SVO owners & racers since 1984

    Poll Finds 30% Of Americans Still Undecided Whether To Vote Out Of Fear Or Spite

  9. #9
    Moderator Meotchh's Avatar
    Join Date
    Jun 2011
    Location
    Seattle, Washington, United States
    Posts
    1,362
    Quote Originally Posted by MikeFleming View Post
    That's also a sign of rampant detonation.
    It's also a sign that Bob has worked on your car!
    There's nothing more to see here, now move along...

  10. #10
    Noob
    Join Date
    Jun 2012
    Location
    Charlotte, NC
    Posts
    9
    You want the hottest plug you can handle without detonation/melt piston. The hotter the plug the easier it is for the flame to get started and the quicker the burn time which is good for thermal efficiency. The spark plug is the hottest thing in the cylinder (hence you burn holes in pistons directly under the plug). It's very very rare to auto-ign before spark (see my other explanation in CR thread) so it can come down to what your pistons can take heat wise but it is possible to ignite before spark. You also want to run the biggest gap your ignition system can handle....again aids in flame generation and start time. Also plug with multiple straps are JUNK! Its a marketing scheme....the spark will always travel the path of least resistance. You'll never have a dual spark. Also the multiple strap plug shied the spark from turbulence which is bad and they extract more heat from the early flame generation making it even more hard for it to get going...this delays flame propagation and hurts thermal efficiency.

  11. #11
    Building Boost beeker's Avatar
    Join Date
    May 2012
    Location
    Squamish BC
    Posts
    30
    I Engresh please LOL
    growing OLD is mandatory - growing UP is optional

  12. #12
    Building Boost oneowner88lx's Avatar
    Join Date
    May 2012
    Location
    Maryland
    Posts
    41
    If you are running a stock or close to stock you can always cross the motorcraft number over to lets say an NGK number. A lot of manufacturers have conversion charts on line.
    My Web Site:
    To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

  13. #13
    Moderator

    (aka Anonymous) Club Member Patrick's Avatar


    Join Date
    Jun 2011
    Location
    I live under the moss-covered bridge
    Posts
    1,049
    sparkplugs.jpg

    Eenie Meenie Miney Moe ...
    "Just leave me alone. I know what to do" (Kimi)

  14. #14
    Noob
    Join Date
    May 2012
    Location
    Palmdale, CA
    Posts
    16
    Quote Originally Posted by Patrick View Post
    sparkplugs.jpg

    Eenie Meenie Miney Moe ...
    I see Pat has started posting his baby pictures! Next he'll be posting one of himself with his bottle.... probably Dewars if I know Pat!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •