Results 1 to 2 of 2

Thread: Valve train geometry

  1. 04-05-2024, 10:22 PM #1
    cprhodin
    cprhodin is offline
    Noob
    Join Date
    Oct 2013
    Location
    United States
    Posts
    5

    Valve train geometry

    Does anyone have the numbers for the valve train? Things like valve stem angle and relative positions of the CAM and fulcrum center.

    Chris
    Reply With Quote Reply With Quote
  2. 05-04-2024, 06:25 PM #2
    cprhodin
    cprhodin is offline
    Noob
    Join Date
    Oct 2013
    Location
    United States
    Posts
    5
    In case anybody wants to know... I measured it and checked my results by making a sheet metal template that I could slide under the cam and over the lifter and valve stem with as close to zero clearance as I could manage. Here are the numbers referenced to the cam center.

    Lifter fulcrum center (x,z): -1.3202", -1.06385"
    Center of the valve stem contact patch (x,y): 1.06675", -1.20419"

    Chris
    Reply With Quote Reply With Quote
« oil pan gasket

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules